Skip to content

Acrobat 3X touchless rollover car wash.

A brushless gantry on rails with profile tracking, 100 to 150 bar jet pumps and a facility length of 8 or 11 m.

Rendering of the Acrobat 3X touchless rollover with a pickup in the bay

The Acrobat 3X is a touchless rollover car wash for cars, SUVs, light commercial vehicles and minibuses. The vehicle stays still while the wash gantry travels over it on rails and cleans every surface with high-pressure water, with no brush on the paint.

A PLC runs the machine, with a 7-inch color touchscreen operator panel and inverter-controlled travel on the rails. A profile-tracking system follows the vehicle's contour so the nozzles keep an even distance from each surface. The machine washes and dries, and its modular build takes optional equipment.

The machine in 3D.

Rendering of the Acrobat 3X touchless rollover with a pickup in the bay

Acrobat 3X at a glance.

Machine height and facility length can be changed to suit the site.

  • 100–150 bar

    Jet water pump pressure

    From two piston jet pumps of 11 kW (15 HP) each.

  • 245 cm

    Maximum wash width

    The machine itself is 280 cm wide.

  • 200–300 cm

    Maximum wash height

    Set by the machine height, 310 to 410 cm.

  • 8 or 11 m

    Facility length

    The length of bay the machine travels in.

  • 17 kW

    Drying fans, installed power

    Two vertical fans and two horizontal fans.

  • 380 V / 50 Hz

    Electrical supply

How the touchless rollover car wash cleans.

The Acrobat 3X cleans with water from a high-pressure system of two piston jet pumps, 11 kW (15 HP) each. Jet pump pressure is 100 to 150 bar.

  • Side wash units. Fixed right and left side wash units are mounted on the main frame.
  • Horizontal wash unit. A moving horizontal wash unit covers the front, roof and rear.
  • Travel. Inverter control moves the gantry along the vehicle at a precisely controlled speed and reduces vibration.
  • Profile tracking. The system reads the vehicle's surface geometry and keeps the wash units at an even distance from it.
Technical drawing of the standard Acrobat 3X: a yellow and gray wash gantry with the ACROBAT 3X name on its beam

The 180-degree horizontal wash unit.

The horizontal wash unit turns through 180 degrees and follows the vehicle profile, so its nozzle groups reach each surface at a set distance and angle.

  • An inverter, a servo motor and the system control drive the nozzle movement at each stage of the wash.
  • It covers the front bumper, hood, roof, trunk lid and rear, including the recesses between them.

Foam, wax and drying.

Foam and chemicals go on through the moving horizontal unit, wax after the wash, then two sets of fans dry the vehicle.

  • Foam and chemicals. Dosing pumps feed shampoo and foam to nozzles on the moving horizontal unit, at 20 to 35 g of chemical foam per vehicle.
  • Wax. A dosing system applies wax after the wash at about 3.5 to 4 bar, 20 g per vehicle.
  • Vertical dryer. A fixed unit in the machine body with 2 fans, each on a 5.5 kW motor, clears the sides.
  • Horizontal dryer. A moving unit with 2 fans, each on a 3 kW motor, follows the vehicle profile over the roof, windshield and rear window.

The drying fans have 17 kW installed in total.

Brushless car wash machine options.

The Acrobat 3X is a brushless car wash machine with a modular build. It takes these options:

  • Undercarriage wash. High-pressure water under the vehicle for mud, salt and built-up dirt, with 4 kW installed.
  • Lava foam. A thick, high-density active foam before the wash, to soften heavy dirt.
  • Triple foam. Active foam in three colors before the high-pressure wash.
  • Ceramic protection. A thin hydrophobic coat on the paint after the wash.
  • Wheel and tire wash. A unit with a soft brush for brake dust and dirt on the wheels.
  • Wheel wash robot. A fixed unit concealed in the machine body, with its own 100 bar, 11 kW supply and V-jet nozzles on self-rotating cylinders for the wheels and the undercarriage.
  • Payment terminal. Credit card, contactless card, QR code, token and coin.
  • Color. RAL colors, with an electrostatic powder coat.

Undercarriage wash module.

The undercarriage wash is a separate module that can be installed at any site, alongside any of our machines. It stands in the approach lane, before the wash starts.

Low blaster units on each side of the lane spray the wheels and the underbody as the vehicle drives in.

They spray from 7.5 bar for cars and 12.5 bar for larger vehicles, through 15 nozzles for cars and 25 for larger vehicles.

Ask for it with your quote

Touchless car wash gantry specifications.

The Acrobat 3X touchless car wash gantry is 280 cm wide and 310 to 410 cm high, depending on the wash height chosen.

ItemValue
Max machine height310, 340, 360, 380 or 410 cm
Max wash height200, 230, 250, 270 or 300 cm
Max machine width280 cm
Max wash width245 cm
Machine length, standard model220 cm
Facility length8 or 11 m
Jet water pump pressure100–150 bar
Air pressure6 bar
Air consumption20 L/min
Water supply pressure3.5–4 bar
Water consumption180–250 L/vehicle
Electrical supply380 V / 50 Hz
Chemical foam20–35 g/vehicle
Wax20 g/vehicle
Vertical drying fans2
Horizontal drying fans2
Drying fans, installed power17 kW
Undercarriage wash, installed power4 kW
Wheel wash robot, power11 kW
Operation time per vehicle5–8 min, depending on the program
BrushesNone on the body
ControlPLC, 7-inch color touchscreen

The standard model is 340 cm high with a 230 cm wash height.

Request a quote for the Acrobat 3X.

Request a quote

Acrobat 3X and Acrobat 2X compared.

Both are touchless rollover car wash machines under PLC control. The Acrobat 2X washes with two arms that move on a bridge in six axes. The Acrobat 3X has fixed side wash units and a horizontal unit that turns through 180 degrees.

ItemAcrobat 3XAcrobat 2X
Wash unitsFixed side units, moving horizontal unit turning 180 degreesTwo movable arms on a bridge, six axes
Facility length8 or 11 m15 m
Max wash height200–300 cm220 cm
Max wash width245 cm220 cm
Max machine width280 cm420 cm
Max machine height310–410 cm320 cm
Water pump pressure100–150 bar100–150 bar
Voltage380 V400 V
Drying, installed power17 kW80 kW
Operation time per vehicle5–8 min5–7 min

The Acrobat 3X washes vehicles up to 245 cm wide, against 220 cm on the Acrobat 2X. From a machine height of 340 cm, its wash height of 230 cm or more is also above the Acrobat 2X. For brush washing, see the car wash systems overview.

What a site needs for the Acrobat 3X.

The site supplies power, water and compressed air, and a bay 8 or 11 m long.

  • 380 V / 50 Hz

    Power

    The drying fans have 17 kW installed power.

  • 3.5–4 bar

    Water

    Water supply pressure. Water consumption is 180 to 250 L per vehicle.

  • 6 bar

    Compressed air

    Air consumption of 20 L per minute.

  • 8 or 11 m

    Space

    Facility length. The machine is 280 cm wide and 310 to 410 cm high.

Requesting a quote for a touchless rollover car wash.

Send your site and the vehicles you expect to wash with the quote form. These choices set the machine:

  • Machine height, 310 to 410 cm, which sets the wash height of 200 to 300 cm.
  • Facility length, 8 or 11 m.
  • Options: undercarriage wash, lava foam, triple foam, ceramic protection, wheel washing and a payment terminal.
  • Color, from the RAL range.

To compare the Acrobat 3X with the rest of the range, see all our car wash systems.

Request a quote.

Leave your details for the Acrobat 3X.

Request a quote

Tell us about the site and the machine you have in mind. Pala, our AI sales assistant, replies by email and asks anything else we need. You can ask for a person at any time.

Fields marked are required.

Your site
Do you already have a site? (required)

Lay out your site in the site builder

Up to 5 files: JPG, PNG, WEBP, HEIC or PDF, 10 MB each. They are kept private.

The machine
Optional marketing consent

Requesting a quote does not sign you up for anything else.

How we use this information

Europe Makine uses the details you submit and your replies to respond, qualify and route your inquiry, including through Pala and our AI service provider. A person makes commercial decisions. We do not sell your personal information or share it for cross-context behavioral advertising. Sales-inquiry records are normally kept for 24 months after the last substantive contact, unless a longer period is needed for a transaction, legal obligation or dispute.

Read our Privacy Policy and Terms of Use.

Frequently asked questions.

What is the Acrobat 3X?

It is a fully automatic touchless rollover car wash. The vehicle stays still and the wash gantry travels over it on rails, cleaning with high-pressure water and no brushes on the body. A PLC runs it, with a 7-inch color touchscreen operator panel.

How long does an Acrobat 3X wash take?

A wash takes 5 to 8 minutes per vehicle, depending on the program.

Which vehicles can the Acrobat 3X wash?

Cars, SUVs, light commercial vehicles and minibuses. The maximum wash width is 245 cm, and the maximum wash height is 200 to 300 cm depending on the machine height chosen.

How much space does the Acrobat 3X need?

The facility length is 8 or 11 m. The machine is 280 cm wide and 310 to 410 cm high, and the standard model is 220 cm long. Machine height and facility length can be changed to suit the site.

What water pressure does it wash at?

Two piston jet pumps of 11 kW (15 HP) each supply water at 100 to 150 bar. Profile tracking keeps the nozzles at an even distance from the vehicle.

How does the Acrobat 3X dry the vehicle?

A fixed vertical unit with 2 fans on 5.5 kW motors dries the sides. A moving horizontal unit with 2 fans on 3 kW motors follows the vehicle profile over the roof, windshield and rear window. The fans have 17 kW installed in total.

How much water and chemical does it use per vehicle?

Water consumption is 180 to 250 L per vehicle. Chemical foam is 20 to 35 g per vehicle and wax is 20 g per vehicle.

What power, water and air does it need?

An electrical supply of 380 V at 50 Hz. Water supply pressure of 3.5 to 4 bar, and compressed air at 6 bar and 20 L per minute.

Which options can be added?

Undercarriage wash, lava foam, triple foam, ceramic protection, a wheel and tire wash unit with a soft brush, a wheel wash robot at 100 bar, a payment terminal and RAL colors with an electrostatic powder coat.

How is the Acrobat 3X different from the Acrobat 2X?

The Acrobat 2X washes with two arms moving in six axes on a bridge; the Acrobat 3X has fixed side units and a horizontal unit that turns through 180 degrees. The Acrobat 3X washes up to 245 cm wide against 220 cm, and needs a facility length of 8 or 11 m against 15 m for the Acrobat 2X.

What payments can the terminal take?

The optional payment terminal takes credit card, contactless card, QR code, token and coin. The customer chooses a wash program on it and starts the wash.

Can the machine be painted in our colors?

Yes. The Acrobat 3X can be built in RAL colors, with an electrostatic powder coat.